![]() ![]() ![]() The data is sent with an error correction code, but receivers may choose to use it only for error detection without correction. (The stereo difference signal extends up 38 kHz + 15 kHz = 53 kHz, leaving 4 kHz for the lower sideband of the RDS signal.) The RBDS/RDS subcarrier was set to the third harmonic of the 19 kHz FM stereo pilot tone to minimize interference and intermodulation between the data signal, the stereo pilot and the 38 kHz DSB-SC stereo difference signal. The two standards are only slightly different, with receivers able to work with either system with only minor inconsistencies in the displayed data.īoth versions carry data at 1,187.5 bits per second on a 57 kHz subcarrier, so there are exactly 48 cycles of subcarrier during every data bit. Radio Broadcast Data System ( RBDS) is the official name used for the U.S. The standard began as a project of the European Broadcasting Union (EBU), but has since become an international standard of the International Electrotechnical Commission (IEC). RDS standardizes several types of information transmitted, including time, station identification and program information. Radio Data System ( RDS) is a communications protocol standard for embedding small amounts of digital information in conventional FM radio broadcasts. Communications protocol standard in FM radio broadcasts ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |